Full set selection control——Passengers in any floor or car can summon the elevator while responding to the run command.
Overhaul operation——When the operating conditions are met, press the up/down buttons to make the elevator jog up/down at the inspection speed.
Slow self-rescue operation——The elevator is in a normal state and is not in the door zone. At this time, as long as the safety requirements of the start are met, the elevator will automatically run to the leveling floor at a slow speed to open the door and release the passenger.
Automatically open the door at the station——The elevator automatically opens the door.
Automatic control of keeping the door open time——Under normal conditions, the door remains open for a short period of time.
Open the door outside this hall——The summon button is held down and the door remains open.
Close the button to close the door in advance——Pressing the close button causes the door to respond immediately to the door closing action.
Open the door to open the door——Pressing the door open button in the car opens the door that has been closed or not yet closed.
Fully loaded——When the elevator is fully loaded, the elevator does not respond to the passing call signal and only responds to the car command.
Weighing compensation——The elevator automatically detects the car load data to improve the comfort of the elevator start.
Parallel operation——The two elevators coordinate the call via the CANserial communication bus.
Operate independently——Operation is similar to the service function of the waiter